How To Safely Wrap A Motorcycle Helmet

By | November 27, 2022

Motorcycle helmets are designed to protect riders from head injuries, but if you’re not careful about how you wrap your helmet up after use, you could put yourself at risk for damaging the internal lining of your helmet.

There are several methods of keeping your head protected while you’re riding your motorcycle, including the traditional full-face helmet, which covers the face and neck, and open-face models, which only cover the top and sides of the head.

Whatever type of helmet you choose to wear, be sure that it’s in good shape and that it fits securely on your head to help prevent injuries and keep you safe in case of an accident.

To keep your helmet in top shape, follow this simple guide on how to safely wrap a motorcycle helmet after each use.

Right Materials

Can you wrap a motorcycle helmet? The short answer is, yes. You can also vinyl wrap a helmet with the right materials and tools. To start, you will need a roll of clear packing tape, your favorite color vinyl wrap, scissors or a sharp blade for trimming the vinyl to size, time to work and some patience.

Yeezy Foam Helmet – The Ultimate In Head Protection?

You will also want to have a clean surface to work on so that the tape sticks to it without any problems. Once you have everything set up, then all you have to do is peel off the backing from your clear packing tape and carefully line it up in sections around the helmet.

The Right Tools

A few key tools that you need to wrap a motorcycle helmet are: scissors, masking tape, a plastic bag, painter’s tape and patience. You’ll also need to decide if you want to use a vinyl wrap or not. If you do, you will need a heat gun or steamer.

Best Technique To Wrap A Motorcycle Helmet

The right way to wrap a motorcycle helmet is to use the following steps:

  1. Find out what type of surface you want the helmet to be on. You can use either a flat surface like a table, or you can use a curved surface like your knee.
  2. Cut the fabric that is larger than the helmet in half and lay it on the desired surface. Pull one end over so that it lies on top of the other with one side curving up and over to form a bowl shape.
  3. Place your vinyl in this new bowl-shaped area, pulling it tight enough so that there are no wrinkles but not too tight so that it won’t stretch for next steps 4-6 below
  4. Once it’s pulled tight all the way around, cut off any excess vinyl from the sides where it is sticking out past the edge of the fabric
  5. Cover both halves (or as much as possible) with masking tape
  6. Using scissors, carefully cut along one of your masking tape lines. Keep going until you have completely removed all masking tape, then remove that piece of fabric, and throw it away. Repeat on all sides until you have a helmet-shaped piece of fabric without any masking tape
  7. Once it’s wrapped tightly around your helmet, use clear packing tape to hold down any part that is still not attached
  8. Take your glue and apply it in strips across the inside rim so that you will be able to stick your wrap onto it
  9. Smooth out wrinkles by applying pressure with both hands wherever needed
  10. Finally, take a strip of packing tape and cover it around the entire outside of your newly taped wrapping
  11. Put some more at the bottom so that you don’t scratch yourself when putting on or taking off your helmet
  12. And finally, peel back only about an inch worth of packing tape to reveal your brand new, beautifully wrapped motorcycle helmet

Motorcycle Helmet Wrap Designs

Wrap a Motorcycle Helmet

Motorcycle helmet wraps are becoming more and more popular as people begin to realize how much they can help with the safety of their helmets. These days, there are many styles and designs that you can choose from, so it’s important to do your research before picking one out.

It’s also important that you know how to wrap a motorcycle helmet correctly so that you don’t damage the integrity of your gear in any way. Keep reading for some helpful tips on designing, wrapping, and caring for your helmet!


Before you start, make sure that you’re in a well-ventilated area and that you’ve got at least two feet of space around you. You should also ensure that there is no debris or dirt nearby. The last thing you want to do is accidentally knock something over onto your helmet!

After making sure everything is clear, it’s time to get started with designing your own custom motorcycle helmet wrap.

10 Most Badass Motorcycle Helmets You Can Buy Right Now

The first step is measuring your helmet so that you know exactly how much material to buy and how much area will be covered by your new design. You can do this easily by wrapping a piece of string around your head, marking where it overlaps with another piece, then checking it against any sizing charts available online or from other brands’ helmets.

If you can find a helmet to measure off of, even better. Once you have the measurements, it’s time to purchase materials. If you can find vinyl wrap kits at home improvement stores like Lowes or Home Depot, that’ll make life easier since most major retailers carry them these days.

However if not, never fear because most hobby shops carry vinyl too! There are kits which come with pre-cut shapes in different sizes (and some may even offer stencils) so all you need to do is decide what kind of design would work best for your taste and go from there!

It really doesn’t matter what size shape you use either; just measure the circumference using a string and cut the shape out accordingly. Wrapping takes a little patience, but the process shouldn’t take more than an hour depending on how intricate your design is.

Remember: make sure you press down firmly when wrapping and give the paint plenty of time to dry in between coats!


Can you put a wrap on a helmet?

You may be wondering if you can put a wrap on your motorcycle helmet. The answer is yes, but it’s not as easy as applying one to your car. Keep reading for more information on how to do so.

How much does it cost to wrap a motorcycle helmet

Most motorcycle helmets can be wrapped in your favorite color. A small helmet with one color will cost about $40, while a large helmet with two colors will cost around $80.

Are motorcycle helmet covers legal?

Motorcycle helmet covers are not legal in all states, but the laws vary from state to state. In most cases, motorcycle helmet covers are illegal if the cover is made of plastic and has an airtight seal that doesn’t allow for ventilation.

Why wrap motorcycle exhaust?

Wrap motorcycle exhaust pipes with pipe wrap is an easy way to make them look nicer, keep them from rusting and give them a good seal so they don’t rattle. It’s also less expensive than buying new pipes, and it can add horsepower by restricting the flow of exhaust gases.

Why wrap headers on a motorcycle?

If you’re like most motorcycle riders, you want your head to stay as safe and protected as possible. Unfortunately, accidents can happen even when we take all the precautions necessary. In the event of an accident, your helmet will be the first line of defense in protecting your head and neck.


You may be wondering if you can wrap motorcycle helmets. Yes, you can! The process is easy and the end product looks great. Be sure to use the right materials for the job, like vinyl wrap motorcycle helmet, so it lasts for years. If you are looking for an affordable way to decorate your bike helmet look no further than this handy guide on how to safely wrap your helmet with vinyl.

Leave a Reply

Your email address will not be published. Required fields are marked *