How To Paint A Football Helmet To Perfection

By | October 25, 2022

If you’re an avid football fan, you know that your allegiance to your team is made clear every time you step out in public wearing your favorite football helmet. And when it comes to the perfect paint job on your helmet, let’s just say there’s only one way to make it happen – learning how to paint a football helmet.

With the right tools and some patience, though, you can make it happen with little trouble at all. Here are the instructions on how to paint a football helmet.

Plan, Prepare and Protect

The first thing you’ll need to do is carefully plan, prepare and protect your helmet. If it is an older football helmet that has seen its fair share of games, you should really have it professionally refinished or repainted before using it again.

However, if you’re looking for some quick tips on how to paint a football helmet yourself, here are some helpful hints. When choosing a color scheme, you will want to match as closely as possible with your team colors.

Also make sure to use latex-based paints as they tend to dry more quickly than oil-based paints. Make sure you cover up any areas where there might be damage such as scratches or cracks so that they don’t become visible after painting. A good way to do so is by taping off these areas with blue painter’s tape.

Preparing Your Surface

The key to a great painted helmet is proper preparation. Your surface has to be clean, dry and free of any dust, dirt or paint. Before you start painting, make sure that your helmet is clean and there’s no dirt or grime on it. Use rubbing alcohol and paper towels or a lint-free rag to wipe down your helmet’s surface; be sure that it’s completely dry before moving on.

If you’re working with an old helmet, sand it lightly with fine grit sandpaper to remove any flaking paint. Paint Selection: After cleaning and drying your football helmet, choose a quality acrylic latex exterior house paint in either gloss or matte finish (your choice).

Latex paints are ideal for helmets because they offer superior coverage without cracking over time like enamel paints do. Choose a color that best matches your team’s colors—you can even buy football team colors at most hardware stores.

Applying the Base Coat (and What to Avoid)

In order to make sure your helmet lasts for years and years, you need to start with a base coat that’s durable enough for hard-hitting action. After all, you don’t want players pulling out chipped paint in front of thousands of screaming fans. There are plenty of paints on the market made specifically for helmets—meaning they’re durable and won’t chip easily.

The key is just finding one that will last as long as possible on your particular helmet. And, most importantly, apply it carefully so you don’t leave behind unsightly globs or drips once you’re finished.

If your skill level isn’t at pro levels yet, try practicing with poster boards or cardboard boxes first; then work your way up to helmets once you feel comfortable painting away!

The Design: Every football player has their own style when it comes to helmets, but there are some things you can do to ensure yours stands out from everyone else’s.

For example, if you’ve got a cool nickname like The Beast, why not put it on your helmet? You could also incorporate other symbols (like flames) or colors (like gold) into your design so people know exactly who they’re looking at before kickoff.

Painting The Lids

Whatever color you paint your lids, you’ll need to give your helmet plenty of time to dry before proceeding. Allow at least two hours for acrylic paints and over night for any lacquers or epoxies.

If you use enamel spray paint, wait until it has dried completely before moving on with next steps. You’ll want both sides of your painted lids perfectly dry before priming and painting because once lacquer dries, there is no going back—lacquer will not stick to previously sprayed-on lacquer. (If you have access to an airbrush, now would be a good time to use it.)

The Lining: Now that your lids are ready for prime, get out your brush and begin applying several thin coats of primer. Let each coat dry in between applications. As you prime each side of your helmet, check periodically that they are still lined up properly.

Painting the Facemask and Hairline

If you are painting a metal football helmet, start by masking off your face mask and hairline. You can tape it off with painter’s tape or use painters’ plastic to cover it. Next, put on gloves and lightly sand down any surfaces that need it, like the facemask.

Then, paint your basecoat (your team’s main color) over these areas. Use short strokes in both directions to get even coverage; allow your basecoat to dry thoroughly between coats if you’re going for multiple colors on one helmet.

Next, paint your accent color (your team’s secondary color). If you have some bare spots remaining on either of these first two steps, feel free to go back and touch them up with extra paint before moving onto step three.

Your last step is to spray your clear coat over all of your painted areas. This will protect everything from chipping and fading away! Allow at least 24 hours for everything to completely dry before using again.

Finishing Touches – Eyeholes, Laces and Cleats

The eyes and laces are painted on separately so that they can dry completely before you paint over them. Cut them out with some small scissors and use an eye hole punch (or make your own) to get perfect round circles. Make sure that when you’re ready to put in your laces, you don’t glue down both sides—just one of them.

This gives it more room for movement inside the helmet once it’s fully assembled. The final touch is the cleats, which aren’t too hard: Just cut little squares of painter’s tape and stick them in place! Once you have all your pieces done, mix up a few shades of blue to create your palette, and then start painting.

We used three different shades of blue acrylic paint—one lighter than the others—to give our helmets depth and dimension. Start by doing all of your base coats first; let them dry thoroughly before moving on to anything else. Once those layers are finished, go back in with darker colors if needed or just fine-tune what you already have.

Letting it Dry

When you’re painting a large object like a helmet, one of your biggest challenges will be getting proper coverage. Filling in every nook and cranny can be difficult, but not impossible. After you spray your first few coats (we recommend three), start from one side of your helmet and use an artist’s brush or an old toothbrush to do some touch-ups.

You should notice that as you work over different spots on your helmet, they dry at different rates; this means that within minutes, there are likely areas that have completely dried while others still have wet paint on them. Brush just those areas until they match their surroundings; if necessary, go back with another light layer of paint and repeat until everything is even again.

The key is to keep brushing lightly, so that you don’t accidentally wipe off all of your hard work. If you do make a mistake, don’t worry—it happens! Just take a clean cloth and wipe off any excess paint so it doesn’t run onto other parts of your helmet.

Clean Up with Peanut Butter

When painting something like a football helmet, it’s important to keep small spills from getting out of control and ruining your hard work. This is where peanut butter comes in handy. Since peanut butter is sticky, it helps keep spills in check while you finish up with other areas of your design.

After you’re done, simply wipe away with a paper towel and start again on another area. No one will ever know! However, if you do get carried away with eating the PB—don’t tell anyone…okay? 😉 The Cheapest Way to Get Your Helmet Painted: If you’re looking for an inexpensive way to have your helmet painted professionally, try contacting local high schools or colleges that have their own equipment staff.


Can I paint my own football helmet?

There are a lot of different ways to paint football helmets. Some people use acrylics, others use watercolors, and others use solvents. The most important thing is to find a way that you like and that works well for you.

There are many different designs and colors available, so it’s important to get creative and find one that you like.

What kind of paint do you use on a helmet?

If you’re painting your football helmet, it’s important to know the types of paint that are used. Many people use either a black or white paint, but there are other colors available as well. Here’s a rundown on the most common types of paint used on helmets:

· Black: This is the most commonly used paint, and it’s typically applied with a brush. It can be used on all sorts of surfaces, from simple shapes to complicated designs.

· White: This is the second most commonly used paint, and it’s typically applied with a roller. It can be used for areas that need to be completely clear, or it can be used in conjunction with black to create an overall design.

· Gold: This is a special type of paint that only exists in professional football leagues.

How hard is it to paint a football helmet?

The paint job on a football helmet can be an intricate and time-consuming task, but it’s not as difficult as you might think. Here are some tips to help you get the job done right.

Can you paint a football helmet with acrylic paint?

If you’re looking to paint your football helmet in a different color, there are a few methods you can use. You can either use a spray bottle of water or an airbrush to paint the helmet, but some people prefer using acrylic paint.

When painting with acrylic paint, be sure to start with a very light color and work your way up. If you get too much pigment on the helmet, it will take away from the realism of the painting.

How to paint a motorcycle helmet logo?

How to paint a motorcycle helmet logo is a question that many people are asked. The following steps can help you paint a motorcycle helmet logo:

1. Start by drawing the outline of your motorcycle helmet on canvas or paper. This will help you plan where the logo will go and make sure it is accurate.

2. Once your outline is complete, begin painting the color of your bike’s helmet in shades of blue and black. You can use any medium you like, but try to keep the colors together so their effect is consistent.

3. Once all of your colors have been painted on, add the highlights and shadows using a light brush or chosen tool. Be sure to use enough light to make the logo Look realistic, but not so much that it becomes too bright or dark.

How to prepare a football helmet for cleaning?

A football helmet is a very important piece of equipment for a football player. It is essential to keep it clean and free of dirt, dust, and other debris. Here are some tips on how to do this:

1. Rinse the helmet thoroughly with water and soap. This will remove any dirt, dust, and debris that may have built up over time.

2. Use a mild detergent to clean the inside of the helmet. This will help reduce the amount of dirt and debris that needs to be removed in order to maintain its cleanliness.

3. Lint-free cloths can also be used to clean the inside of the helmet if desired. Simply unfold the cloth and place it over the area that needs cleaning; then spin around so that all of the dirt, dust, and debris are removed from the cloths surface.

How long does it take to paint a bike helmet?

When painting a bike helmet, many people forget that the paint must be dry before it can be applied. Painting a bike helmet takes time and patience, so it’s important to have everything ready before beginning.


Helmets are an integral part of any football team’s uniform, and that is why players need to treat them with care. Making sure your helmet looks like brand new can help give you a mental edge when it comes down to game time. While you might be nervous about doing something wrong, there are several ways you can ensure that your helmets look fantastic every time you hit the field.

So, if you’re looking for a little advice on how to keep your helmet looking fresh as ever, here are some tips for painting a football helmet. You won’t regret it!

Leave a Reply

Your email address will not be published. Required fields are marked *